The Products in US Stock Only Free Shipping to USA. 
Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance.
Customers in Other Countries Please Click Here to Order:
24pcs/pack P-365 Acrylic Shadowless Adhesive for Channel Letter

Features
1.Quick drying;
2.Transparent, shadowless, and bubble-free;
3.Low odor;
4.Environmental protection does not hurt the skin.

Specifications
Product specification: 473ml
Color: transparent
Model: P-365
Glue color: Transparent
Operating time: a few seconds - 1 minute
Reinforcement time: 5 minutes
Product name: Acrylic shadowless glue
Temperature range: -30℃~+100℃
Package: 24pcs/pack
Adhesive strength: 80%
Storage conditions: 5~30℃, dark, dry
Application range: acrylic and acrylic bonding, double or multi-layer acrylic large-area composite, no shadow and no bubbles

Shelf life: The shelf life of unopened products is 18 months

Note: The lower the temperature, the slower the positioning time will be

Precautions
1. Please ensure that the surface of the bonded object is clean and dry, without any pollutants, such as: dirt, oil stains, lubricating oil and rust.
2. Take the product out of the refrigerated environment and allow the adhesive to reach room temperature before use. The best use temperature should be between 18-32 degrees.
3. After the operation is completed, the unused glue should be tightened immediately and sealed for storage. When using it again, if there is a little crust on the seal, just remove it, and it will not affect the normal use.
4. Avoid contact with eyes, skin and clothing. After skin contact, please wash it with soapy water immediately. If it accidentally splashes into your eyes, please rinse it with plenty of water immediately. If you still feel unwell, you must go to the hospital for examination.
5. If you need to use a dispensing machine to apply glue, it is recommended to soak the dispensing needle in a container containing silicone oil when the operation is over or interrupted to prevent curing and clogging the needle, and remove a small amount of glue in the needle when working again.