The Products in US Stock Only Free Shipping to USA. 
Canada and Mexico Customers need to pay the extra delivery charges, Please contact our customer service in advance.
Customers in Other Countries Please Click Here to Order:
6pcs/pack P-751 Signage adhesive Acrylic adhesive for Borderless Fonts Channel Letter

Features
1.Fast installation;
2.Good stickiness;
3.Stable and weather-resistant;
4.Low odor;
5.No waste;
6.High strength, impact resistance, strong weather resistance.

Specifications
Product name: P-751
Glue color:White
Commodity name: High-end version of acrylic structural adhesive
Temperature range: -40℃ ~ +120℃
Clamping time: 8-12 minutes for initial curing, 24 hours for full curing
Operating time: 4-7 minutes
Product specification: 50ml
Package: 6pcs/pack
Shelf life: stored between 8-18 degrees Celsius, the shelf life of unopened products is 12 months
Application range: signage structure installation, acrylic signboard, signboard body luminescent liner bonding, signboard body sealing,
Metal three-dimensional character installation, background wall, shop signboard

Note: The lower the temperature, the slower the positioning time will be

Precautions
1. Please ensure that the surface of the bonded object is clean and dry, without any pollutants, such as: dirt, oil stains, lubricating oil and rust.
2. Take the product out of the refrigerated environment and allow the adhesive to reach room temperature before use. The best use temperature should be between 18-32 degrees.
3. After the operation is completed, the unused glue should be tightened immediately and sealed for storage. When using it again, if there is a little crust on the seal, just remove it, and it will not affect the normal use.
4. Avoid contact with eyes, skin and clothing. After skin contact, please wash it with soapy water immediately. If it accidentally splashes into your eyes, please rinse it with plenty of water immediately. If you still feel unwell, you must go to the hospital for examination.
5. If you need to use a dispensing machine to apply glue, it is recommended to soak the dispensing needle in a container containing silicone oil when the operation is over or interrupted to prevent curing and clogging the needle, and remove a small amount of glue in the needle when working again.