Description
Material：100%TPU Material, ECO Solvent Ink
Transfer Time：10-15 sec
Temperature ：150-160 °C
Transfer Pressure：20-30 Pound
Size ：A4 (210mm*297mm)
Thickness ：100-130um



Main Feature
(1)Adopt imported PU material,it has excellent elasticity and Its weather resistance, is good, good fastness after washing .
(2)This vinly is non-adhesion type, it is convenient to produce massive.
Not suggest to make tiny pictures or thin lines(because if the picture you want drop out from the film, it should be stick again by glue).
It can be made with machine or cold knife , not suggest to use laser cutting.
* If cut from back side, can use laser cutting machine.



Information
(1)Material:imported elastic PU ,high-temperature resistance BOPET film.
(2)Peeling method and the effect:cold peeling ,matt and light.
(3)Heat transfer requirement:temperature 150-160 degrees, time:10-15s/time,pressure: 20-30P.
(4)Washing test:Home launder test:40 degrees,more than 50 times,30min/time AATCC test:more than 10 times.
(5)Textile care:Iron the garment from inside to outside.
(6)Use tools: cold knives(including scissor/graver/cutting plotter), laser engraving machine, cutting machine .


Application :
Cotton, Textiles, Fabric, Blend, Clothing. Leather etc