APM-H180A Single gun acrylic polisher

How to use this polishing machine, H180

Ключевые характеристики:

- Кислородно-водородный генератор  - машина, полирующая акрил при помощи пламени высокой температуры.

- Имеет компактный размер, небольшой вес, экономит электроэнергию, легкий в эксплуатации, безопасный и надежный.

- Максимальный выход газа — 95 л/час.

- Процесс электролиза с последовательным и параллельным соединением обеспечивает высокую эффективность работы.

Конструкция пламенной пушки:

1.     Регулирующий клапан

2.     Разъем

3.     Пламенное сопло

4.     Изогнутое пламенное сопло (опционально)

5.     Корпус 

6.     Входной воздушный порт

7.     Пламенное сопло булавочного типа (опционально).

Спецификация:

Размер машины: 380х250х300мм

Вес НЕТТО: 8кг

Вес БРУТТО: 11кг

The flame acrylic polishing machine’s instruction:

Flame gun instruction:

1. Adjusting valve;  2. Connector; 3. Flame nozzle; 4. Bend flame nozzle (option); 5. Flame gun bar; 6. Air inlet port;
7. Pin type flame nozzle (option).


Add water timely
After several hours of operation, the water level may fall below the “middle” line, you should add some water. Distilled water is the best choice, next are purified water, cold boiled water and mineral water.

How to add water?
1. Turn off the torch.
2. Switch off the power and open the valve on the torch to let out the remaining gas.
3. Screw off the top cover.
4. Add water close to the “high” line.
5. Screw on the cover and switch on the machine, and it can work again.

Attention:
KOH or NaOH is dangerous, please do not eat them.
The temperature is up to 2800℃ when burning, please put the flame polishing machine in the safe place.
Do not operate the flame acrylic polishing machine while your hand is wet; be careful of the electric shock.

Warning
When abnormal things happened, such as abnormal noise, smell, smog, quite high temperature, electric leakage, you should cut off power supply immediately.
Do not repair it by yourself, you should contact us.
The above cover; please do not load metal pieces.
Please connect the ground wire.
Forbid ignite while no air pressure

• Synthetic Glass Industry.
The synthetic glass (acrylic) polisher works with high temperatures flames that wrought the organic handicraft article.
• Electronic Industry. IC encapsulation.
• Semiconductor.
• Nonferrous welding, braze welding.（In the application of welding the nonferrous metals, oxygen is not necessary instead it uses the oxy-hydrogen generator; it can saved more than 30% cost compared with the other method s that uses the same material and workload. 1. It can weld all kinds of chains and strings of platinum, gold, silver, copper, ect.  2. Lead and tin pole fusion accumulator. 3. Engineering precision.
• School laboratory.）
Provides a convenient and safe oxy-hydrogen flame.




Quality report: