Код товара:CW-6000ANTY
We are authorized as "S&A" brand name product agent.
All of S&A water chillers are certified with design patent. Counterfeiting is not allowed,
Please recognize S&A logo when you purchase S&A water chillers.
S&A CW-6000 series is high-precision compression refrigeration water chiller, with intelligent temperature control,completed configuration,perfect protection and alarm system.
S&A industrial water chillers are popular for its 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature to avoid producing condensate water and protect the laser tube.You can adjust the water temperature under constant temperature.
Suggestion:
Intelligent temperature control mode for summer
Constant temperature control mode for winter
Note: Cooling water additive is forbidden by express company, so we could not put it into the package. You can buy it from local.
Model | CW-6000AN | ||
---|---|---|---|
Power Supply | AC 1P 220V, 50Hz | ||
Current | 2.3~8.3A | ||
Machine power | 1.52kw | ||
Compressor power | |||
1.06KW | |||
1.44HP | |||
Refrigerating Capacity | |||
10714Btu/h | |||
3.14KW | |||
2700Kcal/h | |||
Refrigerant | R-410a | ||
Refrigerant Charge | 800g | ||
Precision | ±0.5℃ | ||
Tank Capacity | 15L | ||
Reducer | Capillary | ||
Protection | Over current protection for compressor, flow alarm, over temperature alarm | ||
Pump Power | 0.37KW | ||
Max.flow | 70L / min | ||
Max.lift | 28M | ||
Inlet and Outlet | Rp1/2" | ||
Net Weight | 72kg | ||
Gross Weight | 80kg | ||
Product Dimension | 26.4" x 18.5" x 35" (670 x 470 x 890mm) | ||
Package dimension | 29" x 24" x 41" (740 x 610 x 1040 mm) |
Independent production of sheet metal, evaporator and condenser. Multiple alarm protection.
Adopt IPG fiber laser for welding and cutting sheet metal. The laser will stop working once it receives alarm signal from the water chiller for protection purpose.
Equipped with water pressure gauges and universal wheels.
Water pressure gauges help monitor the discharge pressure of water pump while univeral wheels facilitate the moving of the chiller.
Inlet and outlet connector equipped.
Chiller inlet connects to laser outlet connector. Chiller outlet connects to laser inlet connector.
Level gauge equipped.
Cooling fan of famous brand installed.
With high quality and low failure rate.
Customized dust gauze available and easy to take apart.
The intelligent temperature controller does not need to adjust the controlling parameters under normal circumstance. It will self-adjust controlling parameters according to room temperature for meeting equipment cooling requirements.
User also can adjust the water temperature as needed.
Temperature controller panel description:
(1) Alarm Display:
When alarm occurs, the error code and the temperature will be alternately displayed.
(2) To suspend the alarm:
In alarming state, the alarm sound could be suspended by pressing any button, but the alarm display remains until the alarm condition is eliminated.
In order to guarantee the equipment will not be effected while abnormal situation happens on the chiller, CW-6000 series chillers possess alarm protection function.
(1) Alarm output terminals and wiring diagram.
(2) Alarm causes and working status table.
Note: The flow alarm is connected to the normally open relay and normally closed relay contacts, requiring operating current less than 5A, working voltage less than 300V.
Open the package to check if the machine is intact and all the necessary accessories are completed. |
Open the injection port to feed cooling water. (Do not let the water spill over!) |
According to system conditions, please connect the water inlet and outlet pipe well. |
Plug in power, turn on the power switch. (Do not start up without water in the water tank!)(2) After the first boot, you must immediately check whether the water pipe leaks. (3) Power switched on, if the water temperature is below the set value, it is normal that fans and other components of the machine do not work. The temperature controller will automatically control the working conditions of the compressor, magnetic valve, fans and other parts based on the set controlling parameters. (4) As it takes a longer time to start over the compressor and other components, according to different conditions, the time is range from seconds to minutes, so do not turn off the power and again on frequently. |
Check the water level in the water tank. |
Adjust parameters of temperature controller. |
Please ensure that the power supply and electrical outlet are in good contact and the earth wire must be firmly grounded! |
Please make sure there is stable and normal voltage for the working chiller! |
Unmatched power frequency can cause the chiller damage! |
To protect the pump, it’s strictly forbidden to run the chiller without water in the storage water tank! |
Please be sure that the air inlet and air outlet are in good ventilation! |
The filter screen must be regularly cleaned! |
Please pay attention to the effect of the condensate water! |
Professional use only! |
Failure | Failure Cause | Approach |
---|---|---|
Machine turned on but unelectrified | ||
Power cord is not plugged in place | Check and ensure the power interface and the power plug is plugged in place and in good contact. | |
Fuse burnt-out | Replace the protective tube in the power socket on the back of chiller. | |
Flow Alarm (controller displays E6)use a water pipe directly connect to the water outlet and inlet but still without water flowing | Water level in the storage water tank is too low | Check the water level gauge display, add water until the level shown in the green area; And check whether water circulation pipe leaks. |
Flow Alarm occurs while running with other equipment (controller displays E6),but there is water flowing and no alarm whten use a water pipe directly connected to the chiller water outlet and inlet. | Water circulation pipes are blocked or a pipe bending deformation. | Check water circulation pipe |
Ultra-high temperature alarm (controller displays E2) | ||
Blocked dust gauze, bad thermolysis | Unpick and wash the dust gauze regularly | |
Poor ventilation for air outlet and inlet | To ensure a smooth ventilation for air outlet and inlet | |
Voltage is extremely low or astable | To improve the power supply circuit or use a voltage regulator | |
Improper parameter settings on thermostat | To reset controlling parameters or restore factory settings | |
Switch the power frequently | To ensure there is sufficient time for refrigeration (more than 5 minuets) | |
Excessive heat load | Reduce the heat load or use other model with larger cooling capacity | |
Ultrahigh room temperature alarm (controller displays E1) | The working ambient temperature is too high for the chiller | To improve the ventilation to guarantee that the machine is running under 40℃. |
Serious problem of condensate water | Water temperature is much lower than ambient temperature, with high humidity | Increase water temperature or to preserve heat for pipeline |
Water drains slowly from outfall during water changing | Water supply inlet is not open | Open the water supply inlet |
Диапазон теплоты цвета | 5~35℃ |
Точность температуры | ±0.5℃ |
Расход | 70л/мин |
Давление | 28~53M |
Охлаждающая способоность | 3,015 кВт |
Model |
CW-6000AN |
||
Power Supply | AC 1P 220V, 50Hz | ||
Current | 2.3~8.3A | ||
Machine power | 1.52kw | ||
Compressor power | |||
1.06KW | |||
1.44HP | |||
Refrigerating Capacity | |||
10714Btu/h | |||
3.14KW | |||
2700Kcal/h | |||
Refrigerant | R-410a | ||
Refrigerant Charge | 800g | ||
Precision | ±0.5℃ | ||
Tank Capacity | 15L | ||
Reducer | Capillary | ||
Protection | Over current protection for compressor, flow alarm, over temperature alarm | ||
Pump Power | 0.37KW | ||
Max.flow | 70L / min | ||
Max.lift | 28M | ||
Inlet and Outlet | Rp1/2" | ||
Net Weight | 72kg | ||
Gross Weight | 80kg | ||
Product Dimension | 26.4" x 18.5" x 35" (670 x 470 x 890mm) | ||
Package dimension | 29" x 24" x 41" (740 x 610 x 1040 mm) |
CW-6000 Водный чиллер для сварочного оборудования или лазера с ЧПУ (AC 1P 220В, 50Гц) руб.154 043/комплект Мин. заказ : 1 комплект |
|
Новые поступления, скидки, акции и подарки
www.sign-in-russia.com, является крупнейшим онлайн-поставщиком рекламной продукции и оборудования, специализируется на предоставлении полного спектра товаров ADТакже, наша компания является уполномоченным сервисным центром Китайской Ассоциации Струйной Печати (China Inkjet Printing Association). Наши офисы находятся в 6 странах по всему миру. Наша продукция охватывает все области рынка рекламных товаров. Мы работаем в соответствии с международными Стандартами качества, и в настоящее время, мы имеем возможность предложить Вам больше чем 9 000 товаров. Так как мы осуществляем централизованные закупки, вся продукция имеет конкурентоспособную цена.